Search for: All records

Additive manufacturing (AM) is often used to create designs inspired by topology optimization and biological structures, yielding unique cross-sectional geometries spanning across scales. However, manufacturing defects intrinsic to AM can affect material properties, limiting the applicability of a uniform material model across diverse cross-sections. To examine this phenomenon, this paper explores the influence of specimen size and layer height on the compressive modulus of polycarbonate (PC) and thermoplastic polyurethane (TPU) specimens fabricated using fused filament fabrication (FFF). Micro-computed tomography imaging and compression testing were conducted on the printed samples. The results indicate that while variations in the modulus were statistically significant due to both layer height and size of the specimen in TPU, variations in PC were only statistically significant due to layer height. The highest elastic modulus was observed at a 0.2 mm layer height for both materials across different sizes. These findings offer valuable insights into design components for FFF, emphasizing the importance of considering mechanical property variations due to feature size, especially in TPU. Furthermore, locations with a higher probability of failure are recommended to be printed closer to the print bed, especially for TPU, because of the lower void volume fraction observed near the heated print bed. 

During the growth of a polycrystalline ice lattice, microorganisms partition into veins, forming an ice vein network highly concentrated in salts and microbial cells. We used microfabricated electrochemical impedance spectroscopy (EIS) sensors to determine the effect of microorganisms on the electrochemical properties of ice. Solutions analyzed consisted of a 176μS cm⁻¹conductivity solution, fluorescent beads, andEscherichia coliHB101-GFP to model biotic organisms. Impedance spectroscopy data were collected at −10 °C, −20 °C, and −25 °C within either ice veins or ice grains (i.e., no veins) spanning the sensors. After freezing, the fluorescent beads andE. coliwere partitioned into the ice veins. The corresponding impedance data were discernibly different in the presence of ice veins and microbial impurities. The presence of microbial cells in ice veins was evident by decreased electrical characteristics (electrode polarization between electrode and ice matrix) relative to solid ice grains. Further, this electrochemical behavior was reversed in all bead-doped solutions, indicating that microbial processes influence sensor response. Linear mixed-effects models empirically corroborated the differences in polarization associated with the presence and absence of microbial cells in ice. We show that EIS has the potential to detect microbes in ice and differentiate between veins and solid grains. 

Macroscopically homogeneous mixtures of p -nitroanisole ( p NA) and mesitylene (MES) can be selectively heated using microwave (MW) energy. The p NA solutes agglomerate into distinct phase domains on the attoliter-scale (1 aL = 10 −18 L), and these agglomerates can be MW-heated selectively to temperatures that far exceed the boiling point of the surrounding MES solvent. Here, a 1 : 20 mixture of p NA : MES is used as a mixed solvent for aryl Claisen rearrangement of allyl naphthyl ether (ANE). ANE itself does not heat effectively in the MW, but selective MW heating of p NA allows for transfer of thermal energy to ANE to accelerate rearrangement kinetics above what would be expected based on Arrhenius kinetics and the measured bulk solution temperature. This focused study builds on prior work and highlights 1 : 20 p NA : MES as a mixed solvent system to consider for strategically exploiting MW-specific thermal effects. 

Abstract Coastal habitats are experiencing decreases in seawater pH and increases in temperature due to anthropogenic climate change. The Caribbean king crab,Maguimithrax spinosissimus, plays a vital role on Western Atlantic reefs by grazing macroalgae that competes for space with coral recruits. Therefore, identifying its tolerance to anthropogenic stressors is critically needed if this species is to be considered as a potential restoration management strategy in coral reef environments. We examined the effects of temperature (control: 28 °C and elevated: 31 °C) and pH (control: 8.0 and reduced pH: 7.7) on the king crab’s larval and early juvenile survival, molt-stage duration, and morphology in a fully crossed laboratory experiment. Survival to the megalopal stage was reduced (13.5% lower) in the combined reduced pH and elevated temperature treatment relative to the control. First-stage (J1) juveniles delayed molting by 1.5 days in the reduced pH treatment, while second-stage (J2) crabs molted 3 days earlier when exposed to elevated temperature. Juvenile morphology did not differ among treatments. These results suggests that juvenile king crabs are tolerant to changes associated with climate change. Given the important role of the king crab as a grazer of macroalgae, its tolerance to climate stressors suggests that it could benefit restoration efforts aimed at making coral reefs more resilient to increasingly warm and acidic oceans into the future. 

Abstract. As the largest active carbon reservoir on Earth, the ocean is a cornerstone of the global carbon cycle, playing a pivotal role in modulating ocean health and regulating climate. Understanding these crucial roles requires access to a broad array of data products documenting the changing chemistry of the global ocean as a vast and interconnected system. This review article provides a comprehensive overview of 60 existing ocean carbonate chemistry data products, encompassing compilations of cruise datasets, derived gap-filled data products, model simulations, and compilations thereof. It is intended to help researchers identify and access data products that best align with their research objectives, thereby advancing our understanding of the ocean's evolving carbonate chemistry. 

Real-time monitoring of the gastrointestinal tract in a safe and comfortable manner is valuable for the diagnosis and therapy of many diseases. Within this realm, our review captures the trends in ingestible capsule systems with a focus on hardware and software technologies used for capsule endoscopy and remote patient monitoring. We introduce the structure and functions of the gastrointestinal tract, and the FDA guidelines for ingestible wireless telemetric medical devices. We survey the advanced features incorporated in ingestible capsule systems, such as microrobotics, closed-loop feedback, physiological sensing, nerve stimulation, sampling and delivery, panoramic imaging with adaptive frame rates, and rapid reading software. Examples of experimental and commercialized capsule systems are presented with descriptions of their sensors, devices, and circuits for gastrointestinal health monitoring. We also show the recent research in biocompatible materials and batteries, edible electronics, and alternative energy sources for ingestible capsule systems. The results from clinical studies are discussed for the assessment of key performance indicators related to the safety and effectiveness of ingestible capsule procedures. Lastly, the present challenges and outlook are summarized with respect to the risks to health, clinical testing and approval process, and technology adoption by patients and clinicians. 

A high-temperature retro-Diels–Alder reaction is accelerated by microwave (MW) heating to rates higher than expected based on Arrhenius kinetics and the measured temperature of the reaction mixture. Observations are consistent with selective MW heating of the polar reactant relative to other, less polar components of the reaction mixture. 

A new attitude control system called Multifunctional Structures for Attitude Control (MSAC) is explored in this paper. This system utilizes deployable structures to provide fine pointing and large slewing capabilities for spacecraft. These deploy- able structures utilize distributed actuation, such as piezoelectric strain actuators, to control flexible structure vibration and motion. A related type of intelligent structure has been introduced recently for precision spacecraft attitude control, called Strain Actuated Solar Arrays (SASA). MSAC extends the capabilities of the SASA concept such that arbitrarily large angle slewing can be achieved at relatively fast rates, thereby providing a means to replace Reaction Wheel Assemblies and Control Moment Gyroscopes. MSAC utilizes actuators bonded to deployable panels, such as solar arrays or other structural appendages, and bends the panels to use inertial coupling for small-amplitude, high-precision attitude control and active damping. In addition to presenting the concept, we introduce the operational principles for MSAC and develop a lumped low-fidelity Hardware-in-the-Loop (HIL) prototype and testbed to explore them. Some preliminary experimental results obtained using this prototype provided valuable insight into the design and performance of this new class of attitude control systems. Based on these results and developed principles, we have developed useful lumped-parameter models to use in further system refinement.